SD-WAN

Hi. Looking for a pointer around BGP over SVR. I believe I've configured this as per the documentation.

My routers BGP peering between the loopback (routing-interfaces) is up and I can see the routes in the RIB. However, the routes are not in the FIB (as per example) and therefore I do not have connectivity between sites. 

I've clearly missed something, any pointers would be gratefully received.

================ ========== ========== ========== ======== ======== ============ ================ ============= =============
Prefix Protocol Selected Distance Metric Uptime Ip Interface name Recursive Fib
================ ========== ========== ========== ======== ======== ============ ================ ============= =============
172.16.10.0/24 bgp true 20 0 5256 10.100.1.2 unavailable true unavailable
                                  10.100.1.2 g3 unavailable true

Have you defined a service (or services) for the traffic you're trying to allow between the routers?

------------------------------
Robert Brack
Owner
13177326044
------------------------------

Original Message:
Sent: 06-21-2021 06:41
From: Dan Kennedy
Subject: BGP over SC

Hi. Looking for a pointer around BGP over SVR. I believe I've configured this as per the documentation.

My routers BGP peering between the loopback (routing-interfaces) is up and I can see the routes in the RIB. However, the routes are not in the FIB (as per example) and therefore I do not have connectivity between sites.

I've clearly missed something, any pointers would be gratefully received.

================ ========== ========== ========== ======== ======== ============ ================ ============= =============
Prefix Protocol Selected Distance Metric Uptime Ip Interface name Recursive Fib
================ ========== ========== ========== ======== ======== ============ ================ ============= =============
172.16.10.0/24 bgp true 20 0 5256 10.100.1.2 unavailable true unavailable
                                  10.100.1.2 g3 unavailable true

Yes, I did have a service but an additional change was required. I had to use the "Use Learned Routes" service route type. 



------------------------------
Dan Kennedy
Technical Director
01273 089190
------------------------------

Original Message:
Sent: 07-06-2021 14:43
From: Robert Brack
Subject: BGP over SC

Have you defined a service (or services) for the traffic you're trying to allow between the routers?

------------------------------
Robert Brack
Owner
13177326044

Original Message:
Sent: 06-21-2021 06:41
From: Dan Kennedy
Subject: BGP over SC

Hi. Looking for a pointer around BGP over SVR. I believe I've configured this as per the documentation.

My routers BGP peering between the loopback (routing-interfaces) is up and I can see the routes in the RIB. However, the routes are not in the FIB (as per example) and therefore I do not have connectivity between sites.

I've clearly missed something, any pointers would be gratefully received.

================ ========== ========== ========== ======== ======== ============ ================ ============= =============
Prefix Protocol Selected Distance Metric Uptime Ip Interface name Recursive Fib
================ ========== ========== ========== ======== ======== ============ ================ ============= =============
172.16.10.0/24 bgp true 20 0 5256 10.100.1.2 unavailable true unavailable
                                  10.100.1.2 g3 unavailable true

Terrific, glad you figured it out.

------------------------------
Robert Brack
Owner
13177326044
------------------------------

Original Message:
Sent: 07-14-2021 06:12
From: Dan Kennedy
Subject: BGP over SC

Yes, I did have a service but an additional change was required. I had to use the "Use Learned Routes" service route type.

After this, it worked fine.

------------------------------
Dan Kennedy
Technical Director
01273 089190

Original Message:
Sent: 07-06-2021 14:43
From: Robert Brack
Subject: BGP over SC

Have you defined a service (or services) for the traffic you're trying to allow between the routers?

------------------------------
Robert Brack
Owner
13177326044

Original Message:
Sent: 06-21-2021 06:41
From: Dan Kennedy
Subject: BGP over SC

Hi. Looking for a pointer around BGP over SVR. I believe I've configured this as per the documentation.

My routers BGP peering between the loopback (routing-interfaces) is up and I can see the routes in the RIB. However, the routes are not in the FIB (as per example) and therefore I do not have connectivity between sites.

I've clearly missed something, any pointers would be gratefully received.

================ ========== ========== ========== ======== ======== ============ ================ ============= =============
Prefix Protocol Selected Distance Metric Uptime Ip Interface name Recursive Fib
================ ========== ========== ========== ======== ======== ============ ================ ============= =============
172.16.10.0/24 bgp true 20 0 5256 10.100.1.2 unavailable true unavailable
                                  10.100.1.2 g3 unavailable true